Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable HVAC Cleaning Across Gramercy
If you live in Gramercy and the air in your apartment feels stale, dusty, or just off, the cause is usually deeper in the system than the register you can see. We handle HVAC cleaning in Gramercy for co-op owners, townhouse residents, and building managers, and we know how these pre-war buildings are put together. Most units here don’t run on their own forced-air ducts. The equipment that actually moves your air is a shared riser, a central ventilation shaft, or a through-wall unit, and cleaning that correctly takes a different approach than a suburban house. Call (866) 979-5520 and we’ll set up a free estimate.
Why Gramercy Homeowners Call Chelsea Air Duct Cleaning for HVAC Cleaning
We’re a full-system indoor air quality company, not a crew that shows up with a shop vac and a promise. Our HVAC cleaning work uses professional-grade Rotobrush and Nikro systems, and we control airborne debris during the job with Abatement Technologies filtration equipment. That matters in a Gramercy co-op, where knocking dust loose in a shared shaft without containment just moves the problem into your neighbor’s kitchen.
Our technicians have up to 15 years of experience, and that experience shows up in how we read older buildings: knowing when a run is crushed behind plaster, when a riser is serving units above and below, and when the right conversation is with the super rather than the unit owner. We work with co-op boards and superintendents across Gramercy regularly, so we understand the access and approval questions that come up before a single tool is unpacked. Ask us for before-and-after photos of your own system, not stock images, and you’ll see exactly what we found and what we changed.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our HVAC Cleaning Services in Gramercy
The work in these buildings usually centers on the equipment that moves air through your unit, not on a furnace duct run. Here’s what we do most in Gramercy.
Air Handler Cleaning in Gramercy
In Gramercy’s pre-war co-ops, the air handler serving a unit or a through-wall PTAC system takes the place a furnace duct would in a single-family home. It collects dust, lint, and biological growth season after season, and that buildup is what you smell when the system first kicks on. We clean the cabinet, the coil face, the drain pan, and the surrounding plenum so the whole assembly is working from a clean start.

Blower Cleaning in Gramercy
A dirty blower wheel throws less air and runs hotter, and in a compact Gramercy apartment you feel that fast. We pull the blower, clean the wheel and housing, and check that the motor and mounts are sound before reassembly. A clean blower is often the difference between a system that wheezes and one that moves air the way it was designed to.

Coil Treatment in Gramercy
New York’s humid summers and dusty heating season leave coils prime ground for buildup, and a coated coil loses capacity quietly. We treat evaporator and condenser coils with products from Honeywell and Aprilaire to address microbial growth, odors, and the residue that plain rinsing leaves behind. Treatment follows mechanical cleaning, never replaces it.

Evaporator Coil Cleaning in Gramercy
The evaporator coil is where air meets cold metal, so it’s where moisture and dust combine into the film that dulls performance. We clean it in place where access allows and pull it where it doesn’t, then verify the fins are open and the drain runs clear. In a Gramercy unit with limited closet space around the air handler, that access check is half the job.
Trusted Brands We Service in Gramercy
We work on the equipment and air quality products already installed in Gramercy buildings, including systems built around Honeywell and Aprilaire components, and we use Guardsman-grade cleaning and protective products in our sanitizing work. We don’t stock parts on a truck or claim to carry a warehouse of components, so if a part is needed we tell you what it is and how we’ll source it. That keeps the estimate honest and the timeline clear. If your building’s central ventilation or your through-wall unit carries a brand name you’re unsure about, tell us what you see on the label and we’ll tell you what the cleaning involves.
See the difference
Before
After
Before
After
Before
AfterCommon HVAC Cleaning Problems We See in Gramercy Homes
- Registers cleaned, riser untouched. A unit’s registers get wiped down but the shared floor-to-floor shaft serving neighbors above and below is never opened, so dust and biological growth are back within weeks.
- Crushed or disconnected runs behind plaster. Original plaster walls hide flex runs that have collapsed or come loose over the decades, and cleaning around them without confirming the disconnect leaves the real leak open.
- Jobs started without board coordination. When kitchen or bath exhaust scope turns out to require building-wide access, a job set up as a single-unit clean has to stop and restart.
- Radiator buildings with no in-unit ducts. In hot-water-heat co-ops there’s often nothing to clean inside the unit at all, and the actual target is the central ventilation shaft or the exhaust riser.
Pricing for HVAC Cleaning in Gramercy, NY
HVAC cleaning here is priced per job by a written estimate, and for a Gramercy unit that usually means pricing the air handler, blower, and coil work together rather than quoting a flat “duct cleaning” rate that doesn’t fit the building. A typical air handler and blower cleaning in a Gramercy apartment runs $350 to $650, and coil treatment with sanitizing adds roughly $150 to $350 depending on access and how many coils are involved. Where a shared riser or disconnected run needs sealing, that scope is quoted separately once we’ve seen it with a camera. The estimate is free, and the written number sets the final price. Call (866) 979-5520 to book one.
We Also Serve Cities Near Gramercy
We work across the neighborhoods around Gramercy, including Kips Bay, Murray Hill, East Village, and Chelsea, and the same pre-war building stock and shared-riser questions come up in all of them. If you manage or own a unit nearby and aren’t sure what your building’s ventilation setup looks like, a call is the fastest way to find out.
Serving Gramercy, NY – Our Local Coverage Area
We serve Gramercy and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HVAC Cleaning in Gramercy
Yes. Even in a radiator-heated Gramercy co-op, there’s usually an air handler, a through-wall PTAC unit, a blower, and a coil that collect dust and need cleaning, plus the building’s central ventilation shaft or kitchen and bath exhaust riser that serves your unit. The job shifts from cleaning a furnace duct run to cleaning the equipment that actually moves your air and the shared shaft behind it. Call (866) 979-5520 for a free estimate and we’ll tell you what your building has.
Because in a Gramercy pre-war building, the kitchen and bath exhaust often ties into a shared shaft that runs floor to floor, so cleaning a unit’s “duct” can mean opening a riser that serves neighbors above and below. That shared scope is why board approval and superintendent coordination come up early. We’ll help you describe the scope to your board so the conversation starts with what’s actually being cleaned.
We confirm the problem first with a camera inspection, then seal or correct the disconnect without opening more plaster than the job requires. Landmark protections around Gramercy Park also limit exterior venting changes, so the fix stays inside the building, which means careful access and verification rather than re-routing. Once the connection is sound, we clean and verify again with the camera. Call (866) 979-5520 to schedule an inspection.
It means cleaning the air handler cabinet, coil face, drain pan, and blower wheel and housing, then checking the motor and mounts before reassembly. In Gramercy’s compact pre-war units the air handler often sits in a tight closet, so access is part of the work. We set negative pressure with Abatement Technologies filtration during the clean so dust doesn’t spread through the apartment. Call (866) 979-5520 for a free estimate.
MERV 8 to MERV 11 is usually the practical range for a Gramercy apartment on shared ventilation, because a filter that’s too restrictive can strain a blower sized for the system rather than the filter. Your exact match depends on the equipment serving your unit, so we check the blower and cabinet before recommending a rating. Call (866) 979-5520 and we’ll look at your setup with you.
Whether you own a pre-war co-op off Gramercy Park, a converted townhouse on a side street, or manage a building nearby, the place to start is a camera look at what your system actually has. Call Chelsea Air Duct Cleaning at (866) 979-5520 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get one flat price per system agreed before work starts, and before-and-after photos of your own system when the job is done.
Written by the team at Chelsea Air Duct Cleaning.